Technical characteristics of Electric Bricking Screw Press:

1. The shaping product boasts high quality, excellent consistency, and a high pass rate. You can set up the striking force digitally and programmatically, simulating manual operation, first light hitting, then heavy hitting;

2. Accurate energy control and accurate strike force. The switched reluctance motor speed regulation is accurate with less error, and the input energy control of the screw press is accurate;

3. The transmission chain is short, the structure is simple, the wearing and consumable parts are few, the maintenance is convenient and the cost is low. Without two friction disks, the motor directly drives the flywheel to move forward and reverse, driving the slider to move up and down, and generating a striking force.

4. Boasting a High degree of automation, can reduce the number of corporate servants. The program controls the molding process with the push-button operation, which reduces the worker labor intensity and the number of servants;

5. High efficiency and energy saving. When the motor is started during the process of blow molding, feeding and output, and mold cleaning, the motor is stopped, which saves 30%-50%of energy compared with the traditional friction press;

6. High safety with braking sensitivity and reliability. The emergency stop button is set to ensure the slider can stop at any position;

7. High reliability, safety and durability. Switched reluctance motors have the characteristic of soft starting, with low current and large torque, which reduces the impact on the power grid; the motor rotor structure is solid and can withstand the impact force load, and the stalled and missing phases will not burning-out the motor and controller.

JH58ZK series electric program-controlled Bricking Screw press has the same structural characteristics as JH58Z electric program-controlled screw brick press.

However,this model has a larger work surface,which is suitable for making larger refractory bricks.

JH58D series direct driving type electric screw press is an energy-saving precision die forging equipment.The motor rotor connected to the screw shaft forms a direct driving,With the characteristics of no mechanical transmission but motor direct driving,high transmission eficiency,low failure rate,low motor speed and large torque,it can meet the various technological requirements of forging strikes.

The electrical control system uses a programmable controller(PLC)as the main control device,which improves the reliability of the entire machine.

A human-machine interface(HMI)is used to exchange information between the operator and the machine,which is convenient for users to set parameters such as blow energy,and the fault display of the machine.

With the characteristics of strong anti-eccentric load,small die stress,long service life and high precision of forging forming,the machine is superior to traditional screw presses in terms of energy saving and precise control of striking force.

Suitable for die forging,precision pressing,correction,bending,embossing and other processes.It is an ideal precision forging equipment for the train,automobile,tractor,ship,aviation,hardware tool,medical equipment,tableware and other industries.